Home » Blog » Honeywell Sensing and Control

Category: Honeywell Sensing and Control

Honeywell Sensing & Control DPR TruStability Board Mount Pressure Sensors

The TruStability™ DPR Series from Honeywell Sensing & Control is a piezoresistive silicon pressure sensor offering a ratiometric analog output for reading pressure over the specified full scale pressure span and temperature range. These sensors are fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and non-linearity using an onboard Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1kHz. The DPR Series is calibrated over the temperature range of -20°C to 70°C [-4°F to 185°F]. The sensor is calibrated for operation from a single power supply of 5.0VDC. These sensors measure differential …

»Read Full Article

Honeywell Transportation Attitude Reference Sensor, TARS series

Honeywell Sensing and Controls’ Transportation Attitude Reference Sensor or TARS-IMU is a packaged sensor array designed to report vehicle angular rate, acceleration, and inclination for demanding applications in industries such as heavy duty, off-highway transportation. TARS-IMU enables autonomous vehicle characteristics and enhances efficiency and productivity by reporting key data required to automate and monitor movements of vehicle systems and components. The sensor fusion algorithm can be customized for specific vehicle applications through on-board firmware, allowing movement data to be filtered for extraneous environment and vehicle movements. With two sensor models for different power levels, TARS-IMU accommodates both 5 V and 9 V …

»Read Full Article

Honeywell MicroPressure Board Mount Pressure Sensor, MPR Series

Honeywell Sensing and Control’s MPR Series is a very small piezoresistive silicon pressure sensor offering a digital output for reading pressure over the specified full scale pressure span and temperature range. It is calibrated and compensated over a specific temperature range for sensor offset, sensitivity, temperature effects, and non-linearity using an on-board Application Specific Integrated Circuit (ASIC). This product is designed to meet the requirements of higher volume medical (consumer and nonconsumer) devices and commercial appliance applications.   VALUES  Very small form factor: Enables portability by addressing weight, size, and space restrictions; occupies less area on the PCB.  Wide pressure …

»Read Full Article

Honeywell Sensing & Control SZL-VL Limit Switch Upgrades

Honeywell is pleased to announce an upgrade to the MICRO SWITCH SZL-VL Series Limit Switch effective May 16, 2017, offering the potential use in a wide variety of applications.The new product features include the addition of positive opening contacts (side rotary version only), enhanced sealing level to IP67; NEMA 1, 12, 13, extended the temperature range, and added CCC certification.The upgraded design includes modified seals, housing and a new design cable gland to improve seal performance. The housing design and mounting hole pattern remain the same. Any dimensional changes do not exceed more than 1mm. The SZL-VL-S Series miniature-type limit …

»Read Full Article

Honeywell Sensing & Control RSC Series Board-Mount Pressure Sensors

Honeywell is pleased to introduce its TruStability™ Board Mount Pressure Sensors, RSC Series, a high-end, high-value addition to its TruStability™ portfolio. The RSC Series is designed for applications that require higher performance than existing TruStability™ products. When compared to Honeywell’s existing TruStability™ sensors, the RSC Series provides greater than 18 bits of real resolution and a Total Error Band that is four times tighter while utilizing the same small, stable package. The Series is a more cost-effective than premium laboratory grade devices.The RSC Series integrates proven sense element technology and stable packaging used in the TruStability™ platform with Honeywell’s innovative …

»Read Full Article

Honeywell Sensing & Control Intrinsically Safe Pressure Sensors

Honeywell is pleased to introduce its Industrial Pressure Sensors, Intrinsically Safe, Model IP IS (Global Approvals), a new platform designed to provide repeatable, reliable and accurate pressure measurements over time. These rugged, stainless steel, all-welded devices are configurable with the most commonly requested industry options. They may be used in many demanding, harsh environments and with a variety of media. Each sensor is fully temperature compensated and calibrated.FEATURES All-welded, 300 series stainless steel and Hastelloy®  Pressure range 7 bar to 350 bar [100 psi to 5000 psi] Standard compensated temperature range -10°C to 85°C [14°F to 185°F]  Accuracy: Standard accuracy …

»Read Full Article

Honeywell Sensing & Control Wing Union/Hammer Union Pressure Sensors

Honeywell is pleased to introduce Model 434, an addition to its Model 435 and 437 Wing/Hammer Union Pressure Sensor portfolio that allow for use in demanding oil and gas applications as well as stimulation and circulation systems.Model 434 allows for use in applications requiring high pressure (up to 20,000 psi) due to its Weco® size 2002/2202 Wing Union-compatible fittings. Models 435 and 437 are Weco 1502-compatible, which allows for a maximum pressure of 15,000 psi. Additionally, with this launch, Models 434, 435, and 437 offer optional NACE-compliant Inconel® 718, which allows for use in sour gas applications where natural gas …

»Read Full Article

Honeywell Sensing & Control S-Beam Tension and Compression Load Cells

Honeywell is pleased to introduce its S-Beam Tension and Compression Load Cells, Models 151/152, designed to provide a reliable and stable force sensor with bi-directional (tension and compression) calibration to meet essential product development, testing and verification needs.Material and component testing is important to most manufacturers, from a steel maker ensuring the mechanical strength and property of the metal, to a food and beverage manufacturer ensuring the texture of food and strength of packaging. Force testing through the use of load cells in development and production enables the manufacturer to provide consistent quality and performance of products for forces necessary …

»Read Full Article

Honeywell Sensing and Control PX3 Heavy Duty Pressure Transducers

Honeywell is pleased to announce the efficient, affordable and durable PX3 Series Heavy Duty Pressure Transducers, designed primarily for system pressure monitoring in HVAC, refrigeration, air compressor, pump and valve systems.FEATURES Pressure range: 1 bar to 46 bar | 15 psi to 667 psi (absolute and sealed gage) Ratiometric output: 0.5 VDC to 4.5 VDC Fully calibrated and temperature compensated Total Error Band: ±1.0 %FSS from -20°C to 85°C [-4°F to 185°F] External freeze/thaw resistance: 6 cycles from -30°C to 50°C [-22°F to 122°F] Insulation resistance: < 100 MOhm, 1500 VDC Dielectric strength: AC1500V, 1 min. or AC1800, 1 s …

»Read Full Article

Honeywell Sensing & Control VF360NT and VF360ST High Sensitivity Latching Sensor ICs

Honeywell Sensing and Control is pleased to announce its High Sensitivity Latching Sensor ICs, VF360NT, VF360ST, AEC-Q100 qualified for use in the transportation industry. AEC-Q100 qualification provides enhanced reliability and quality of electronic components. Components meeting these specifications are often suitable for use in harsh automotive environments without the customer’s need for additional component-level qualification testing. The VF360NT is north pole activated, while the VF360ST is south pole activated.FEATURES Qualified to the AEC-Q100 standard for potential use in automotive applications Fastest response time in its class [1.5 μs] Operate from 30 Gauss typical at 25°C [77 °F] and 55 Gauss …

»Read Full Article